This is the logical evolution of ZAMIR BOIANGIU’s Quad LACK coffee table. The four tables melded together!
What you need:
4 LACK tables
screws 3 x 35 mm
screws 5 x 80 mm
wood glue
old pieces of wood
Step 1
Cut two tabletops to the shape, you what to have.
Step 2
Fit plates of wood to the cut edges to stabilize them.
Step 3
Cut the legs to the equivalent length, which you need to reach the height of the table you want to have. I cut 8 legs to 27 cm and 8 legs to 5 cm.
Stabilize the longer ones with pieces of wood, again. The short legs I have filled with a mix of wood glue and sawdust.
Step 4
Connect the tabletops with glue or silicone. I took silicone for that.
The orange color is film, because I wanted to have 3 colors.
Step 5
Put the longer legs to the upper tabletop. In addition, I connected the two tabletops with small pieces of thin wood.
Step 6
Screw the lower tabletop to the legs with the long screws and connect the two plates again.
Step 7
Fix the short legs to the lower tabletop
Step 8
Enjoy your new coffee table
The post Evolution of Quad LACK coffee table appeared first on IKEA Hackers.
via IKEA Hackers http://ift.tt/1dxie7r From Matze
No comments:
Post a Comment