Materials: Samtid standing lamp
Make the Samtid standing lamp into a wall lamp which can still swivel. To achieve this we’ll make a wooden block with a vertical groove of 22×22 mm:
1. Glue 3 pieces of (soft)wood with dimensions (mm) given onto each other. Drill 2 holes of 5mm through the middle
2. Make a cover of plywood (around 12 mm thick) and dril 4 holes of 4 mm, 10 mm from the sides
3. Make a support plate that keeps the lamp from sliding downwards. I used a piece of aluminium strip 3×20 mm, but thin plywood can also be chosen. drill 2 screw holes and one bigger one for the cord
4. Screw support plate on the bottom of your wood block
5. Screw the whole block onto wall
6. Cut off the plug of the Samtid lamp, unscrew the bottom tube (both sides) and saw this off at 160mm
7. Screw this short tube back onto the lamp, and pull the cord through the 8 mm hole of the support on the wall
8. Place the amputated Samtid in the support, close it with 4 small screws. Done!
The post IKEA Samtid wall lamp appeared first on IKEA Hackers.
via IKEA Hackers http://ift.tt/1Aop5n7 From Alexis
No comments:
Post a Comment