Monday, December 29, 2014

Easy boardgame tabletop from LINNMON By: Dan R

rsz_img_20141218_135403 rsz_img_20141218_135415 rsz_img_20141218_135331


We needed an easy way to expand our family room table top when we play board games with guests. We’d looked at different options for table tops, but the LINNMON price ($5.99) was irresistible, and about 1/5 the price of any of the other options.


To finish the hack, we took the unmodified table top, found the center on the bottom, and used the measurements of the depression in the chest that we use as our coffee table. By cutting a couple extra garden stakes into small sections with a 45 degree angle, we created two “corners” that we could glue to the underside of the LINNMON table top in the appropriate place.


Once the glue was dry, it’s as easy as flipping the table top over into the coffee table/chest depression. With the “corners” in place, the table top is centered and doesn’t move when bumped! Less than 30 minutes and problem solved – now we can entertain and not have to bring the kitchen table into the family room.


This hack could easily be modified for any of the IKEA table tops. As long as the top of your coffee table or chest has a small depression, just build the corners and glue (or nail) them in place in the center of the IKEA table top, and the corners will hold the table top steady when it’s flipped onto the coffee table.







via IKEA Hackers http://feedproxy.google.com/~r/Ikeahacker/~3/75cFWDPsjnA/easy-boardgame-tabletop-from-linnmon.html From Dan R

Dressmaking table on casters By: Adam M. Lewis

20141214_115110


This is simply the Norden leaf table with some leg extensions and casters, used as a conveniently storable table for tracing out patterns and cutting cloth for home dressmaking.


norden-gateleg-table

Photo: IKEA.com



In total the table is raised 16cm. It is important to get casters with brakes so the table doesn’t move in use. I used some steel brackets which have a screw about 6mm diameter fixed to them, which goes into the extension piece. I drilled two holes right through the legs and used 2 X M5 countersunk bolts secured with nuts because I thought wood screws might tear out. This wasn’t enough to keep the extension pieces from pivoting slightly, so I added some plates secured with wood screws. The end result is not elegant but is acceptable for a workbench. The hack could also be improved by using smaller casters which would have room to swivel properly.







via IKEA Hackers http://feedproxy.google.com/~r/Ikeahacker/~3/Sn2q8fR543A/dressmaking-table-on-casters.html From Adam M. Lewis

Wednesday, December 24, 2014

Santa suit from SANELA curtains By: Jules IKEAHacker

This is a cute one from an IKEA co-worker in Denmark. The mascot’s suit is made out of SANELA curtains, all decked up to welcome visitors to the store. I will leave you with this Fabler Bjorn Santa as I take a break for the holidays. Merry Christmas and Happy New Year! ~ Jules


IMG_188022194158787


At IKEA Gentofte, Denmark, we have Fabler Bjorn as our store mascot and I am responsible for him. To give all our visitors and customers an even more special feeling when they see Fabler this Christmas, I wanted to give him something special. So I made a Santa outfit for him out of the SANELA curtains, which is a good hack, (something I never done before) and his belt is made by an colleague and he used POLARVIDE plaids, also an different IKEA product


Thank you very much for your time to read this and Merry Christmas.


~ Steve







via IKEA Hackers http://ift.tt/1Ef5cGO From Jules IKEAHacker

Stocking Display By: Emily Campbell

IMG_1479


I turned the cabinet door (line unknown, but looks like Hemnes or Liatorp) horizontally, then using my die-cut Cricut machine, I spelled out “The stockings were hung” and added hooks. Voila! A stocking display for my fireplace-less Arizona home!







via IKEA Hackers http://ift.tt/1rhDfse From Emily Campbell

Last minute Christmas table decoration By: Jules IKEAHacker

For my Christmas table, I customized some Öppen plates and Rättvik glasses. For the plate, I cut out a stencil of a deer that I put on the back of the plate and I sprayed it with artificial snow.


img_9212

ikea-2


I hacked my glasses by wrapping steel wire around the stem of the glass and adding pearls one by one as I wrapped the wire around it.


img_9147

ikea-6


See the complete tutorial.


~ Emma







via IKEA Hackers http://ift.tt/1GXteEa From Jules IKEAHacker

Kids’ clothes hangers as Christmas tree By: Jules IKEAHacker

clotheshangertree


My daughter Maddie’s use of ikea kids coathangers!


Merry Christmas!


~ Fiona lee







via IKEA Hackers http://ift.tt/1xgGwdP From Jules IKEAHacker

This Was Not Our Christmas Card, But It Should Have Been From Jackie

Today's Inspiration comes from guest blogger Jackie Be sure to check out their blog!

Merry Christmas!


Christmas Painting 2014 | tealandlime.com


This was not our Christmas card. We already mailed cards before this little painting came about. But I wish we had used this, because it’s cute and it reminds me of a special moment with my boys.


We’re currently taking the longest holiday break ever. It wasn’t planned but two weeks ago the boys started passing one illness after another back and forth like hot potato. One or both of them has been home from school every day since. Officially making a two week holiday break more like four weeks by the time they go back to the school in the new year.


One day we snuggled up in bed to watch a movie and I played with a new-to-me iPad app, Paper by Fifty Three. I’ve always loved drawing, even though I am not good at it and can’t ever think of what to draw.


I’m positive the question I asked my dad most frequently as a kid was, “Dad, what should I draw?” It’s super frustrating to stare at a blank page eager to draw without a clue what to draw. Dad always answered, “A firetruck.”


Anyway that day I asked my boys what to draw and in unison they said, “me”. I scribbled on my iPad until I had something that resembled both boys and our two fur babies, Sofia and Ryder. The boys sat over my shoulder and watched the whole time to see every line unfold and took great delight in giving me color suggestions.


A few days later they wanted me to draw again. This time I duplicated my original and gave it some holiday flare—I told them I was Christmas-ifying their picture. Again they were delighted to watch me doodle.


These pre-holiday sick days and sweet doodling moments brought me full circle to my word of the year—relish. I started out the year with one goal; to relish the small moments. Relish in the sweet, the unplanned and unexpected, the good stuff of life.


How To Make a Felt Engraved Pillow | Teal & Lime for Makelyhome.com


To be fair, I am horrible at relishing. As a recovering perfectionist and over(anxious)-planner, it’s hard for me to be in the moment. To simply be and enjoy. My brain is always working a few steps ahead.


The word relish alone wasn’t enough to remind me to stop and soak it in every once and a while, so I had a quote to keep me on track.



The only person you have to be better than is the person you were yesterday. – Unknown



This quote could be interpreted to mean don’t worry about the competition, the only one you’re competing against is yourself, or keep your eyes on your own paper. I believe in all of those, but I took it a little differently…


It reminds me of something a health coach told me about meditating. Which I told her I tried, but couldn’t get into. Well, when you first start meditating it’s hard to focus. And many people give up. She told me not to judge myself on how well I meditated, but to celebrate trying. Because the trick is to just keep trying. Little by little your focus improves and you can focus longer and longer.


To me being better than the person you were yesterday is continuing to try and little by little getting better. So this year, little by little I’ve been trying to relish.


My big test was when both boys were home for 12-weeks straight this summer, no camps or daycare. Meanwhile I took on my biggest project to-date to build and launch an online school. There were many times I felt my work jeopardizing how present I was with the boys. Each day I tried to be a little better. Waking early in the morning to relish in my work before the boys woke, so I could spend the day relishing in them…extra karate classes, impromptu picnics in the park, and splashing in the neighborhood pool.


By the end of the summer, I’ll be honest, I was itching for school to start, so I could spend more time on my work. It’s a constant balancing act. But I wouldn’t trade my summer with the boys for anything.


Trying each day to relish a little bit more didn’t seem like it would ever amount to much. But a year later it’s added up to less time on my phone, almost never working in the evenings anymore, and relishing in the unexpected when sick days turn into sick weeks. And somehow (probably not coincidentally) I am producing some of my best work while still feeling like a good mom.


Okay, it’s time to get back to relishing. Today we hope to finish Double Fudge by Judy Blume, wrap a bunch of presents, and spend Christmas Eve with my family.


I hope you have a wonderful holiday season and spend your days relishing in the special moments with your loved ones.


Warmly,

Jackie



Tuesday, December 23, 2014

Adding a showcase display in Billy bookshelf By: dimo

showcase


The idea behind this is that I wanted to display my little collection of Ferraris somewhere in my Billy bookshelf properly. So I figured out to add between two shelves a small show case using window glass and hinges. I wrote down the glass dimensions and I went to my local hardware store and asked the seller to cut for me a glass which in my case was 76cm x 20 cm.


Hinge

hinge installed

hinge screwed in

collection

handle


I also requested him to drill a hole in the glass somewhere in the middle upper section so I could use later a handle. Then I purchased also a pair of self locking hinges to use with the piece of glass. What I did later on was to screw the hinges in the bottom shelf install the window in the hinges and the handle and voila!!!!! The photos I believe are self explained. Good luck to the ones that will try it! It’s very easy!!!


showcase foto







via IKEA Hackers http://ift.tt/1t85nz9 From dimo